Vehicle Mounted Air Compressor

SaleBestseller No. 1
VIAIR 10000 Onboard Air System
  • Includes Electrical Connectors and Relay
  • Ultra-light Duty Onboard Air System
  • Omega Bracket with Mounting Hardware
  • 1.0 Gallon Air Tank
SaleBestseller No. 2
VIAIR Constant Duty Onboard Air System
  • Intended for inflation of tires up to 37 inches. Designed to be installed and mounted onto the vehicle.
  • Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools
  • Comes with a VIAIR 450C Air compressor and a 110 to 145 PSI Pressure switch.
  • 150 PSI maximum working pressure and 100% duty cycle at 100 PSI; 20feet 12-Gauge Wire with Inline Fuse Holder
  • Can inflate four tires up to 37 inches in diameter. Designed for uninterrupted use for up to an hour! (at 72 degrees ambient temperature) One year manufacturer's defect warranty included with copy of the receipt. Please check the manufacturer's website for a wiring diagram.
Bestseller No. 3
ARB CKMA12 Air Compressor High Output On-Board 12V Air Compressor
  • Constructed entirely of lightweight, high strength engineering grade materials
  • Quality components for quiet operation and extra long life
  • Hard-anodized cylinder bore for reduced friction
  • Sealed for moisture and dust resistance
  • Heavy duty maxi-fuse equipped for professional in-line circuit protection
SaleBestseller No. 4
VIAIR Heavy Duty Onboard Air System
  • Intended for inflation of tires up to 35 inches. Designed to be installed and mounted onto the vehicle.
  • Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools
  • 150 PSI maximum working pressure and 33% duty cycle
  • Remote mount air filter assembly sealed compressor
  • 33 percent duty cycle and 2.54 CFM maximum flow
SaleBestseller No. 5
VIAIR 200 PSI High-Flow Air Source Kit
  • Many uses including train and truck horns, light air tool use, tire inflation and more
  • Includes pre-installed parts which is as follows, 165/200 PSI automatic pressure switch, drain cock, pressure safety release valve, and 1/2 inch air-out compression fitting
  • Comes with the 480C which is a 200 PSI maximum working pressure, oil-less air compressor.
  • Replaceable/relocatable air filter element for harsh environments
  • This system does not come with air horns or an air hose. Those items must be purchased separately.
SaleBestseller No. 6
VIAIR 200 PSI Ultra Duty Onboard Air System
  • Intended for inflation of tires up to 37 inches or to actuate air horns that require 200PSI
  • Includes the essential components to install an onboard air system: 480C Air compressor, pressure switch, 2.5 gallon air tank, relay, air tank fittings, air line and wiring.
  • 200 PSI maximum working pressure, 1.76 CFM @ 0 PSI
  • Can inflate a 37 Inch Tire from 0-30PSI in 7 minutes and 10 seconds.
  • One Year Manufacturer's defect warranty through manufacturer with receipt. Air tank should be used with a drain cock and pressure release valve.
SaleBestseller No. 7
Vixen Horns 3 Gallon (12 Liter) Train/Air Horn Tank with 200 PSI Compressor Onboard System/Kit 12V VXO8330
  • Tank capacity: 3 gallon (12 liter)
  • 12 volt 200 PSI Compressor
  • Anti-Corrosion Coating
  • Precision Welded
  • Pressure Gauge, Pressure Switch, Air Hose and Mounting Hardware Included
SaleBestseller No. 8
Viair 98 Compressor Kit
  • ●12-volt
  • ●Permanent Magnetic Motor
  • ●Duty Cycle: 10% @ 100 PSI
  • ●Max. Working Pressure: 130 PSI
  • ●Max. Amp Draw: 12 Amps
Bestseller No. 9
VIAIR Quarter Duty Onboard Air System
  • Designed to actuacte smaller air horns, air lockers and for minor load levelling adjustments. Not intended for tire inflation.
  • Includes all parts needed for installation of you very own onboard air solution for air lockers and small air horns. Just connect your air line into our onboard air system.
  • 120 PSI maximum working pressure and 25% duty cycle. Please note- use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8 inches is 10 to 11 feet pounds. Recommended torque for 1/4 inches and 3/8 inches is 12 to 15 feet pounds
  • Remote mount air filter assembly, sealed compressor, 2.0 gallon air tank, 90 to 120PSI pressure switch and more!
  • Can be used to inflate helper bags for load leveling, inflate four tires up to 31 inches in diameter or use with heavy duty air horns.
SaleBestseller No. 10
VIAIR 150 PSI High-Flow Air Source Kit
  • Designed as an onboard air solution for actuate air horns.
  • Includes pre-installed parts which is as follows, 110/145 PSI automatic pressure switch, drain cock, pressure safety release valve and 1/2 inch air-out compression fitting
  • 150 PSI maximum working pressure
  • Replaceable/relocatable air filter element for harsh environments
  • Sealed compressor, relocate air filter if operating in outside environment. Product must be mounted rightside up and drained from moisture after use.

Compare The Top 10 Vehicle Mounted Air Compressor