Miter Slide Saw

SaleBestseller No. 1
DEWALT Sliding Compound Miter Saw, 12-Inch (DWS779)
  • Powerful 15 amp, 3, 800 RPM motor delivers extended power and durability
  • Exclusive back fence design cuts up to 2x16 dimensional lumber at 90 degree and 2x12 at 45 degree
  • Super efficient dust collection system captures over 75 percent of dust generated
  • Backed by DEWALT'S 3 year limited warranty
  • Maximum Cutting Thickness:6.75 inch
Bestseller No. 2
Delta Power Equipment Corporation S26-263L Shopmaster 10 In. Slide Miter Saw w/Laser (2018)
  • Lightweight unit is easy to move from room to room or even from job to job
  • Table extensions help support long work pieces
  • Spindle lock holds spindle securely while bade nut is loosened and removed
  • Bevels left - from 0°- 45°, cuts Nominal 2X12 at full bevel
  • Improved laser - with on/off switch. Makes aligning blade to work piece more convenient and precise cuts
SaleBestseller No. 3
TACKLIFE Sliding Compound Miter Saw 12-Inch, 1700W, 3800rpm, Double-Bevel Cut (-45°-0°-45°) with Laser Guide, Extensible Table, Dust Bag, 40T 305mm Blade for Wood Cut - PMS03A
  • ▲Powerful Motor & Laser Guide - 1700W motor delivers 3800rpm per minute for efficient cuts and extended durability. Integrated laser controlled by single switch, marking the cutting line, supporting for sawing long work pieces. Sliding cutting design for added cutting width.
  • ▲Double Bevel Cutting - Double bevel cutting design allows you to adjust the head to left 45°and right 45°to meet different requirements of cutting job. Cutting capacity: (90°x90°-105x335mm)/(90°x45°-105x235mm)/(90°x45°L-60x335mm)/(90°x45°R-35x335mm)/(45°x45°L-60x235mm)/(45°x45°R-35x235mm).
  • ▲Efficient Dust Collection System - Efficient dust collection bag captures over 70% of dust generated. 35mm dust port allows you to connect your vacuum cleaner for ideal 100% dust collection to maintain a clean environment.
  • ▲40 T Blade & Extensible Table - 305mm 40tooth TCT blade for smoother wood, plastic tube, soft metal cuts. Comes with allen wrenches for easy blade change. Large working table for better material support, vice clamping system to secure work piece for safer cutting operation.
  • ▲Included in Delivery - TACKLIFE PMS03A Miter saw, 40 Tooth TCT Blade, 1 Set Carbon Brush, 2 Extension Rods, Allen Wrenches, Dust Bag, 1 Set Clamping System, User Manual, Warranty Card, 24 Months Warranty. Email: support@tacklifetools.com
Bestseller No. 4
Precision Miter Gauge with a Standard Slot (3/4" x 3/8") Steel Bar Equipped with Adjustable Spring Loaded Plungers and Removable Retaining Disc
  • If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
  • The .200" thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.
  • To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼" x ½" slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8" from the base of the miter gauge head.
  • The head is mounted to a solid steel miter bar that measure 18" in length and is .353" thick by .730" wide. Standard miter slots (not Craftsman or Sears branded items) are 3/4" x 3/8" with a 1/8" "T" slot (with slight variances from brand to brand) running the length on the bottom of the slot.
  • The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8" in diameter and is just shy of 1/8" to fit into to the "T" slot to prevent accidental lifting when feeding your stock through. If your saw does not have a "T" slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit.
SaleBestseller No. 5
General International MS3005 10" 15A Sliding Miter Saw, Red, Black & Gray
  • Precision cuts with laser alignment system
  • The max cut capacity at a 90 cross cut is 3-inches x 8-inches
  • 1800 watt, 120Volt 60hertz, amp: 15
  • Cuts wood, plastic and aluminum
  • Includes: dust bag, hold down Clamp, table side extension bars, rear Stabilization bar, includes 10-Inch saw blade with Carbide tipped teeth
SaleBestseller No. 6
DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)
  • POWER AND DURABILITY: 15 amp, 4,000 rpm motor
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents
  • TALL SLIDING FENCES that support crown molding up to 5-1/4-Inch nested and base molding up to 6-1/2-Inch vertically against the fence while easily sliding out of the way for bevel cuts
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90° and a 2x6-Inch dimensional lumber at 45°
SaleBestseller No. 7
Bosch CM10GD Compact Miter Saw - 15 Amp Corded 10 in. Dual-Bevel Sliding Glide Miter Saw with 60-Tooth Carbide Saw Blade
  • ACCURACY: The Bosch-exclusive Axial-Glide System allows wider cross cuts and better alignment
  • CONVENIENCE: Featuring large, upfront metal bevel controls and Square lock precision fences for precise, quick and easy adjustments. Complete with dust collection chute and vacuum adapter for easy clean-up.
  • CONTROL: This miter saw provides accuracy and cutting control at all angles. Crown/chop lock locks head in place for maximum chop cutting capacity for upright base moulding and nested crown.
  • COMPACT: Featuring a compact design that replaces the sliding rail system, taking up to 10 In. less workspace than a slide miter saw. This Bosch miter saw is perfect for tight quarters where other saws just won't do.
  • COMFORT: Large, form-fitting ergonomic ambidextrous trigger handle with soft grip provides maximum comfort for all-day use while the clear lower guard allows for unobstructed visibility throughout the cutting job.
Bestseller No. 8
Hitachi C8FSE 9.2-Amp 8-1/2-Inch Sliding Compound Miter Saw
  • Lightest in its class at only 31 lbs.Power input 1,050W
  • Vertical handle that has a soft, vibration reducing elastomer grip
  • Large pivoting fence and table provide better support when cutting crown molding lying flat.
  • Externally accessible carbon brush for quick and easy brush changes
  • Easy-to-use positive miter stops for quick miter adjustments to 15, 22.5, 31.6, and 45 degrees to the both left and right.
SaleBestseller No. 9
Makita LS1019L 10" Dual-Bevel Sliding Compound Miter Saw with Laser
  • 10" slide miter saw with the Crown molding cutting capacity (6-5/8" nested) of a 12" miter saw
  • Linear ball bearing system engineered to deliver "dead-on" accurate cuts
  • Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity (5-1/4")
  • Unique 2-steel rail sliding system design offers single slide-glide operation; reducing saw's footprint and allowing operation flush against a wall
  • Less weight (57.9 lbs.) and the most compact design in its Class for easy jobsite portability
Bestseller No. 10
Bosch Power Tools GCM12SD - 15 Amp 12 in. Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade
  • Axial glide system: The patented glide system allows wider cross cuts and better alignment while also being compact. This saves you 12 inch of valuable workspace. Bosch glide miter saw also offers unmatched smoothness of cut
  • Capacity: expanded cutting capacity 14 inch Horizontal capacity Nominal 6 1/2 inch Vertical capacity against the fence base 6 1/2 inch Crown capacity against the fence 45 spring
  • Adjustable: the GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detents and roof pitch angles. Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts. Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum
  • Precision: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support
  • Ease of use: Upfront bevel Controls all metal bevel lock lever and range selector located Upfront for quick and easy bevel settings without reaching behind the saw

Compare The Top 10 Miter Slide Saw