Impact Drivers

SaleBestseller No. 1
Makita CT225R 18V LXT Lithium-Ion Compact Cordless 2-Pc. Combo Kit (2.0Ah)
  • Variable 2-speed 1/2" Driver-Drill (0-400 & 0-1,500 RPM) with Makita-built 4-pole motor
  • Variable speed Impact Driver (0-2,300 RPM & 0-3,200 IPM) provides 1,460 in. lbs. of Max Torque and weighs only 2.8 lbs. with battery
  • 18V Compact Lithium-Ion 2.0 Ah battery BL1820 provides up to 50% more run time per charge compared to BL1815
  • 18V Compact Lithium-Ion 2.0 Ah battery BL1820 reaches full charge in 25 minutes or less
  • 18V Compact Lithium-Ion 2.0 Ah battery BL1820 is compatible with 18V LXT Tools
Bestseller No. 2
DEWALT 20V MAX XR Impact Driver Kit, Brushless, 3-Speed, 1/4-Inch, Tool Only (DCF887B)
  • DEWALT built brushless motor, Compact, lightweight design for tight spaces
  • Variable speed trigger, no load speed 0 to 1000, 2800, 3250
  • 3 speed settings for versatility with Precision Drive for added control
  • (3) LED lights with 20 second delay after trigger release
  • No Battery Or Charger Included
SaleBestseller No. 3
BLACK+DECKER 20V MAX Impact Driver Kit (BDCI20C)
  • High Performance Transmission delivers 1375 in-lbs of max torque
  • Quick Release 1/4" Hex Chuck
  • Compact & Lightweight for ease of use
  • Maximum initial battery voltage measured without a workload is 20 volts and nominal voltage is 18
  • Included Components: (1) BDCI202, (1) 20v Max Battery, (1) Charger, (1) Screwdriving bit
Bestseller No. 4
Milwaukee 2853-20 M18 FUEL 1/4" Hex impact Driver (Bare Tool)-Torque 1800 in lbs
  • POWERSTATE Brushless Motor delivers up to 30 percent Faster Driving Speed, increasing users productivity.
  • 4-Mode DRIVE CONTROL provides greater control over output speed and power.Most Compact Impact Driver at 4.59" in length providing more access in tight spaces.
Bestseller No. 5
Milwaukee 2656-20 M18 18V 1/4 Inch Lithium Ion Hex Impact Driver with 1,500 Inch Pounds of Torque and LED Lighting Array (Battery Not Included, Power Tool Only)
  • LED LIGHTING: Keep your work illuminated with the LED lighting array located just below the quick-connect chuck
  • TEXTURED HANDLE: The compact design of this power tool is complemented with the textured rubber grip, which gives you superior handling, even in slippery conditions
  • VARIABLE SPEED TRIGGER: Apply pressure to the trigger to match the amount of power you need on the job. This can drive the motor to create up to 3,450 impacts per minute
  • REDLINK TECHNOLOGY: Electronics inside the impact driver communicate with the M18 batteries that power it to reduce the risk of overheating, which results in more efficient work
  • M18 COMPATIBLE: This cordless Milwaukee impact driver works with the M18 family of lithium ion batteries. Compatible models include the 48-11-1860, 48-11-1850, 48-11-1828, and 48-11-1815, 48-11-1840, 48-11-1820
Bestseller No. 6
DeWalt Impact Driver Ready 3-Piece Socket Adapter Set DW2541IR, DW2542IR, DW2547IR
  • Impact Driver Rated Socket Adaptors - 3-pc Set
  • DW2541IR - 1/4" Hex Shank to 1/4" Drive
  • DW2542IR - 1/4" Hex Shank to 3/8" Drive
  • DW2547IR - 1/4" Hex Shank to 1/2" Drive
SaleBestseller No. 7
Impact Driver, TECCPO 1600In-lbs 20V MAX Impact Drill, 2X2.0Ah Batteries, 1/4" All-metal Hex Chuck, 30 Minutes Fast Charger, 0-2900RPM Variable Speed, Tool Bag Included - TDID01P
  • ▲ 【5-Min Fast Charger & 2pcs Batteries】 This impact drill features with 2pcs 2000mAh Lithium-ion batteries to keep constant running. 4A charger takes only 5 minutes to 25% charge and around 30 mins for a full charge, which save up to 50% time than others.
  • ▲ 【Powerful Torque & Impacts】 High performance 4-pole copper motor delivers 1600In-lbs(180Nm) of maximum torque and 4000BPM of impacts, to meet efficient fastening tasks and large range of applications, help to tackle most screw driving jobs around the house with greater ease
  • ▲ 【Variable Speed & 1/4" Quick Release Chuck】 The speed trigger offers easy control of speed adjustment from 0-2900RPM; 1/4" hex chuck and all metal gearbox provide maximum durability and tightness for bits
  • ▲ 【Rubber Handle & LED Light】Rubber overmolded handle with ergonomic design offers maximum user comfort and less vibration;Trigger-activated LED light illuminates your work area
  • ▲ 【What You Get】1 * TECCPO cordless impact driver-TDID01P; 2 * 20V 2.0Ah batteries; 1 * 30mins fast charger; 1 * contractor bag; 1 * belt clip; 1 * user manual; 1 * 2-years warranty card
Bestseller No. 8
ARES 70606-1/2-Inch Manual Reversible Impact Driver - Flathead 5/16 & 3/8 and Phillips #2 & #3 Bits for Most Common Applications - Disengage Brake Caliper Screws, Rusted Fasteners or Frozen Bolts
  • SET INCLUDES: This set includes one 1/2-inch impact driver, one 1/2-inch drive bit chuck, two Flat Bits (5/16- and 3/8-inch.), two Phillips bits (#2 and #3), and one storage case. The impact driver has corrosion-resistant Chrome plated finish with non-slip knurled grip, and the bits have precision-milled tips for exact fit.
  • HOW IT WORKS: When you strike the top of the tool with a hammer, the drive tang is turned 20 degrees in the direction you have set the tool. You can use this driver with impact sockets and on nuts, bolts, and other fasteners. If you need additional or replacement bits, try picking up an ARES 70013 Impact Bit Set.
  • COMMON APPLICATIONS: Instant impact force loosens rusted or frozen screws without damaging them, so you can save yourself the hassle of having to drill and tap stubborn fasteners, whether you're working on a brake job or changing a rotor.
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Manual Reversible Impact Driver, simply contact customer service for troubleshooting help, parts, replacement, or refund.
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we're proud to help this great organization.
SaleBestseller No. 9
Makita XDT131 18V LXT Lithium-Ion Brushless Cordless Impact Driver Kit (3.0Ah)
  • BL Brushless motor delivers 1, 500 inches pounds Of max torque
  • Variable speed (0 3, 400 RPM & 0 3, 600 IPM) for a wide range of fastening applications
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50percentage longer run time per charge
  • The electronically controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
Bestseller No. 10
Milwaukee 2462-20 M12 1/4 Inch Hex Shank 12 Volt Lithium Ion Cordless 2,500 RPM 1,000 Inch Pounds Impact Driver w/ LED Light and Fuel Gauge (Battery Not Included, Power Tool Only)
  • LED LIGHTING: Keep your work subject illuminated with the trigger-activated LED light panel located above and in front of the trigger. Its location prevents any shadows from being cast by your trigger finger
  • ONBOARD FUEL GAUGE: LED lights on the side of the impact driver let you know, in increments of 25%, how much battery you have left
  • AMBIDEXTROUS BELT CLIP: Whether you're right or left-handed, you can keep the included belt clip attached on the side of the driver that is most convenient for you
  • REDLITHIUM TECHNOLOGY: This driver has internal computer technology that communicates with RedLithium batteries powering it. It enables cross-communication between the two systems, keeping the tool's motor from overheating or drawing more power than it can handle
  • M12 COMPATIBLE: This tool will function with the batteries in the Milwaukee M12 lineup. These include the 48-59-1201, 48-11-1970, 48-11-2401, 48-11-2430, 48-11-2460, 48-11-2420, 48-11-2402, and 48-11-2440

Compare The Top 10 Impact Drivers