SaleBestseller No. 1
Bostitch BTFP02012 6 Gallon 150 PSI Oil-Free Compressor
- Note:Item does not includes hose or gun kit
- 150 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM* delivered @ 90 PSI pump
- High efficiency motor for easy start up in cold weather
- 78.5 dBA** operational noise level for a quiet work environment
- High flow regulator and couplers to maximize air tool performance
SaleBestseller No. 2
Air Compressor, Portable, 3 Gallon Horizontal, Oilless, w/ 10 Piece Accessory Kit Including Air Hose & Inflation Gun (Campbell Hausfeld FP209499AV)
- 3 gallon horizontal tank and 0.36 CFM @ 90 PSI. 110 Max PSI provides plenty of power to tackle DIY projects. Operates on 120 volt house outlet
- Oil-less pump for maintenance-free ownership and strong, reliable motor output. Motor overheated:Allow compressor to cool for approximately 30 minutes so thermal overload switch will reset. Make sure compressor is run in a clean, well-ventilated area.
- Equipped with 10 piece accessory kit which includes a coiled hose, blow gun, inflation needles and fittings
- Conveniently placed gauges are easy to read & this compressor's compact design makes it easily portable
- Ideal for tire and ball inflation; it's also perfect for powering air brushes, air/ brad nailers, upholstery projects and more. Finish your projects faster and easier with Campbell Hausfeld. The Air Power Expert
Bestseller No. 3
Campbell Hausfeld 8 Gallon Portable Quiet Air Compressor (DC080500)
- QUIET: The DC080500 air compressor is up to 50% quieter than comparable compressors, producing just 68 dBA which it makes the unit ideal for indoor and outdoor use
- VERSATILE: This compressor is perfect for inflation, hobby painting, stapling, fastening, nailing, and bolting projects
- DURABLE: The compressor's key components last up to four times longer due to its oil-free, maintenace free, dual piston pump
- PORTABLE: Large wheels and a durable, rubber-grip steel handle makes the unit easy to transport from project to project
- COMPATIBLE: Start your projects right away; bundle this unit with a Campbell 25 ft. Air Hose (PA117701AV), 17 Piece Accessory Kit (MP284701AV)
Bestseller No. 4
DEWALT Pancake Air Compressor, 6 Gallon, 165 PSI (DWFP55126)
- 165 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered at 90 PSI pump. SCFM @ 40 PSI 3.7 scfm
- High efficiency motor for easy start up in cold weather or extension cord application. [14 ga or larger, 50 ft. (15.2 m) or less]
- 75.5 dBA noise level for a quiet work setting
- High flow regulator and couplers to maximize air tool performance
- Power Supply - 120V, 60Hz, 10 amps., universal motor. The air compressor should be located at least 12 inch away from the wall or other obstructions that will interfere with the flow of air
SaleBestseller No. 5
PORTER-CABLE C2002 Oil-Free UMC Pancake Compressor
- 150 psi max tank pressure stores more air in the tank for longer tool run times
- 2.6 SCFM at 90 psi allows for quick compressor recovery time, per ISO1217
- Six-gallon pancake-style tank for stability, includes water drain valve and rubber feet
- Low-amp 120-volt motor starts easily in cold weather or with extension cord
- Durable oil-free pump for long life and no maintenance
Bestseller No. 6
EPAuto 12V DC Portable Air Compressor Pump, Digital Tire Inflator
- CONVENIENCE: Plug directly into Cigarette Lighter Socket of your Vehicle. 12VDC, 10 to 15 amps, 120 to 180W. Equipped with 12V-DC Cigarette Lighter Socket Plug", NOT 110V AC plug.
- MULTIPLE USES: Inflate tires on cars, bikes, sedan and midsize SUV. (Engine size under 3.5 liter) Universal valve connector for schrader valve is ready to use. Additional adapters include needles value (for basketball, balls), short cone/long cone adapters (for inflatable kayak, swimming pool accessories, etc)
- Capacity: DOES NOT SUPPORT truck tires, for instance: light truck tires (LT), heavy duty truck tires or any truck tires.Maximum Psi: 70Psi.
- EASY TO READ: 4 Display Units: PSI, KPA, BAR, KG/CM; LED FLASHLIGHT: Bright Torch
- PREVENT OVER INFLATION: Auto shut off when reaching the desired tire pressure. Overheat protection shuts off automatically when overloading.
Bestseller No. 7
TEKTON 46334 3/8-Inch I.D. by 10-Foot 250 PSI Rubber Lead-In Air Hose with 1/4-Inch MPT Ends
- Makes a flexible connection from rigid supply line to hose reel to isolate vibrations
- Flexible rubber stays soft and easy to work with even at -40 degrees F
- Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F
- Solid brass connectors never corrode and seal better than aluminum, steel, or zinc
- Made in the USA
Bestseller No. 8
DEWALT DCC020IB 20V Max Inflator (Bare)
- High pressure inflation mode with automatic shutoff
- High volume inflation and deflation modes
- Led light helps to provide illumination
- Three power sources for inflation on a jobsite and on the go (20v max battery, 12V DC, or 110V AC)
- Convenient onboard accessory storage
SaleBestseller No. 9
Smittybilt 2781 5.65 CFM Universal Air Compressor
- Auto-thermal cutoff switch - protects motor against damage
- Maximum continuous cycle time (duty cycle) - 40 minutes at 40 psi at 75 degrees Fahrenheit
- Maximum airflow - 72 liters per minute. Quick release 24 foot coil hose
- Integrated easy to read 150 PSI pressure gauge
- Storage bag included
SaleBestseller No. 10
Hromee Hybrid Rubber & PVC Lead-in Air Hose 3/8 Inch x 6FT with Solid Brass 1/4" Industrial NPT Quick Coupler and Plug 300PSI Yellow Whip Air Compressor Hose
- 6 FEET HOSE - The Hromee 3/8 in. x 6 ft. Lead-in Hose is used to connect your air hose reel to your compressor and is made to help absorb the shock loads produced by air powered tools. This durable, lightweight hose is ideal when you need a short length of ready made hose. It helps prevents tangles and reduces user fatique, improves air tool ergonomics.
- HYBRID AIR HOSE - Made of blended with rubber and PVC for good features such as heavy duty, lightweight, no fading, abrasion resistance and so on. Outer layer and inner layer are all hybrid and the middle layer is woven. The hose has the flexibility of rubber without the weight, and the lightness and durability of PVC without the coils. The maximum working pressure is 300PSI and the burst pressure is 900PSI.
- COUPLER & PLUG - Hromee lead-in air hose is equipped with solid brass 1/4 inch FNPT coupler and steel plug for connecting rigid air piping to other devices like hose reels, air compressors and more. Coupler and plug are heat treated to reduce wear on critical mating surfaces.
- SPECIAL PROTECTOR DESIGN - Heavy duty bend restrictors provide the durability to avoid kinks, knots, bends and increase the lifetime of the air hose. 1/4 in. brass MNPT end fittings, better against rust than steel and stronger than aluminum.
- ALL WEATHER USE - The hybrid material make the hose work in extreme cold weather and remain flexible and kink resistant for prolonging using life. The flexible in cold weather temperature range is down -40°F to 150°F which is suitable for professional automotive shops and home DIY work.
Compare The Top 10 Air Compressors Small