Air Compressor For Plasma Cutter

SaleBestseller No. 1
Motor Guard M-30 1/4 NPT Submicronic Compressed Air Filter
88 Reviews
Motor Guard M-30 1/4 NPT Submicronic Compressed Air Filter
  • Pipe Size is 1/4 NPT, Nominal Airflow is 45 CFM, Filtration Rating is .01 Micron and the Maximum Pressure is 125 PSI
  • Temperature Range is 32-175 F, Replacement Element is M-7231/4 and the has NPT connections on bottom
  • Made in USA
  • The ultimate defense against damaging dirty air by removing particulates, condensed moisture and oil aerosols down to .01 microns in size
  • Unit will mount in spray booths, on plasma cutters or on other equipment requiring ultra-clean air and a flexible connection
SaleBestseller No. 2
Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V
26 Reviews
Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V
  • Built in Air Compressor
  • Cuts faster than oxy fuel
  • Smaller heat-affected zone for less warping
  • No gas pressure settings for flame tuning needed
  • More precise cut, thinner kerf, less slag to clean up
Bestseller No. 3
Jewboer 2-pack Air Compressor Filter Oil Water Separator Air Dryer for Spray Gun Plasma Cutters Air Tools Air Line 1/4' NPT Inlet and Outlet,with Quick Connector
6 Reviews
Jewboer 2-pack Air Compressor Filter Oil Water Separator Air Dryer for Spray Gun Plasma Cutters Air Tools Air Line 1/4" NPT Inlet and Outlet,with Quick Connector
  • Eliminates water,oil,dust and particles in air line from air compressor
  • Mainly suitable for paint spray gun and air compressor,matched used with gun,pneumatic tools and hoses
  • Stops water vapor and particles from entering air tools and extends tool life
  • Universal 1/4"NPT inlet and outlet design easily connects air line with air tools and spray guns
  • Condensation exhaust valve is included in this product,Air Pressure:90 PSI
Bestseller No. 4
3/8' COMPRESSED AIR PARTICULATE FILTER WATER TRAP / PRESSURE REGULATOR / DESICCANT AIR DRYER / COALESCING FILTER FOR COMPRESSED AIR SYSTEMS GREAT FOR PLASMA CUTTER
6 Reviews
3/8" COMPRESSED AIR PARTICULATE FILTER WATER TRAP / PRESSURE REGULATOR / DESICCANT AIR DRYER / COALESCING FILTER FOR COMPRESSED AIR SYSTEMS GREAT FOR PLASMA CUTTER
  • New 3/8" Particulate Filter & Pressure Regulator / Water Trap
  • Compressed Air Line Coalescing Filter and desiccant dryer combo
  • 3/8" FEMALE NPT INLET X 3/8" FEMALE NPT OUTLET
  • THREE Stage unit has added water seperator pre filter to remove larger debris and moisture
Bestseller No. 5
S7 50 Amp Built-In Air Compressor Plasma Cutter Portable Plasma Welder Plasma Cutting Machine IGBT Inverter Digital Plasma Welding Machine
  • 【BUILT-IN AIR COMPRESSOR】This plasma cutter provides built-in air compressor,lastest IGBT inverter technology,safe euro tourch connection,industrial application, tolerant to variable power supply , in-built air regulator with preset air pressure,suitable to cut all electrically conductive materials,light weight and compact,strong metal housing
  • 【12MM CUTTING CAPACITY】12MM thickness metal cutting; Faster cutting speed, smooth & beautiful cut surface advantage.
  • 【HIGH EFFICIENCY】Max 50 Amp input current, and adjustable output current with LED display;Advanced inverter technology, stable & higher
  • 【SAFETY PROTECTION】Over-heat, over-pressure, and IP21 level protection; Great wind cooling heat dissipation system.
  • 【WIDE APPLICATION】Suitable to cut most metals, like: stainless steel, alloy, aluminum, mild steel, carbon steel etc. Can be widely used at automotive, ducting work, repair & maintenance, metal processing, manufacture, site work etc
SaleBestseller No. 6
Product Name: Lotos LT3500 35Amp Air Plasma Cutter, 2/5 Inch Clean Cut, 110V/120V Input with Pre Installed NPT Quick Connector, Portable & Easy Quick Setup Metal Cutter
35 Reviews
Product Name: Lotos LT3500 35Amp Air Plasma Cutter, 2/5 Inch Clean Cut, 110V/120V Input with Pre Installed NPT Quick Connector, Portable & Easy Quick Setup Metal Cutter
  • ★ PORTABLE but POWERFUL--the Lotos LT3500 can easily cut up to 2/5"(10 mm) metal with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
  • ★ QUICK Setup--the per installed NPT 1/4" industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
  • ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input; Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5" ideal clean cut and 1/2" maximum severance cut
  • ★SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, etc. Uses non-hazardous compressed air to cut, safe and low cost. ★ PACKAGE INCLUDES--power supply, cutting torch, consumables, ground clamp PRE INSTALLED Air Filter Regulator.
  • ★ SATISFACTION GUARANTEED--with confidence, as we offer 30-days refund/replacement and 1 year warranty. ★ FEEL FREE TO CONTACT US--our customer Care team is always ready to help. Naturally, we hope you don't encounter any problems, but when they crop up, our customer support is there to help! we will provide the Best solution for you.
Bestseller No. 7
3/8' in LINE Desiccant AIR Dryer for Compressed AIR Great for Pneumatic Tools Spray Booth Plasma Cutter
16 Reviews
3/8" in LINE Desiccant AIR Dryer for Compressed AIR Great for Pneumatic Tools Spray Booth Plasma Cutter
  • 3/8" In-Line Desiccant Dryer with Beads, Clear Polycarbonate Bowl to check bead moisture at a glance
  • 5oz Poly Bowl, 3/8 Female NPT Inlet and Outlet, Aluminum Quick Release Bowl Guard
  • Beads turn from Blue to Pink when time to be changed.
  • In-Line Desiccant Dryers are designed to remove moisture from your airlines.
SaleBestseller No. 8
Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
518 Reviews
Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
  • ★ NON-TOUCH PILOT ARC PLASMA CUTTER: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP5000D Plasma Cutter are "PCS22" or "PCS33". Please search "Loots PCS22" or "Loots PCS33"; ★ NOT compatible with Loots PCON40 or PCON90 Consumables Sets or any other third part consumables set
  • ★ OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2" ideal clean cut and 3/4" maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • ★ SETUP WITHIN 1 MIN: The pre-installed NPT 1/4" industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
SaleBestseller No. 9
Hobart 500565 Airforce 27i Plasma Cutter 120/240V
18 Reviews
Hobart 500565 Airforce 27i Plasma Cutter 120/240V
  • Multi-Voltage plug (MVP) allows you to connect to 120 V or 240 V power.
  • Excels at cutting 3/8 in mild steel, can sever 5/8 in mild steel
  • Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
  • More precise cut, thinner kerf, less slag to clean up. XT30R torch with 12 ft lead and consumables
  • Wind Tunnel Technology - Prevents abrasive dust and particles from damaging internal components.Plasma Material Thickness: 1/4 inches to 3/8 inches
Bestseller No. 10
PRIMEWELD Premium & Rugged 50A Air Inverter Plasma Cutter Automatic Dual Voltage 110/220VAC 1/2' Clean Cut Portable
111 Reviews
PRIMEWELD Premium & Rugged 50A Air Inverter Plasma Cutter Automatic Dual Voltage 110/220VAC 1/2" Clean Cut Portable
  • THE ULTIMATE PLASMA CUTTER - When precision metalwork cuts matter. As one of our customers said, "It will do the job very well I have had mine for almost three years and it's been very reliable." Our 50 Amp Digital Air Inverter Plasma Cutter handles cuts up to 1/2" (Max Severance Thickness: 3/4") with ease. Designed for both demanding industrial and construction work, or home and hobby use.
  • MAKES THE PRECISION CUTS YOU NEED - With your Prime Weld Plasma Cutter, you can cut stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials without breaking a sweat. Have limited outlets? No problem. The diversity between 110v and 220v has you covered.
  • TRULY PORTABLE - If you need a portable Plasma Cutter that makes moving from project to project a breeze at a price that won't break the bank, this is it. As another happy Amazon customer said, "For the price this plasma cutter is amazing..." Add our Plasma Cutter to your cart today and experience our high-quality product craftsmanship for yourself.
  • DESIGNED BY PROFESSIONALS - If you are serious about getting the job done, PRIMEWELD is a brand you can trust backed by our fanatical customer service. Our high-quality Plasma Cutters are perfect for metalwork jobs of all shapes and sizes, and our optimized design is based on state-of-the-art MOSFET transistors.
  • RELIABILITY + THREE YEAR WARRANTY - Don't settle for cheap imitations. Our Plasma Cutter is highly reliable and backed by solid customer reviews. Add this to your cart now and have full peace of mind knowing that your Plasma Cutter order today is backed by our solid 3 year warranty

Compare The Top 10 Air Compressor For Plasma Cutter